Crescent Corporation

Gala Valves- Working Principles & More

Gala valves are used to control fluid flow rates by changing the flow path’s size. Gala Valves are commonly used to control process values like pressure, temperature, liquid level. Gala valves regulate fluid flow through the opening and closing of internal passages. The control unit uses the Gala valves to create a loop that sends signals. These signals are received by the control unit and the valve adjusts its internal pores accordingly. To move the stem of a valve, actuators are used. They can be either pneumatic (pneumatic), or electric. The flow rate through the valve is determined by the pressure difference between the outlet and inlet. To reduce fluid flow, the valve is closed. This reduces fluid flow and increases the return pressure.

The Gala Valves Suppliers follow the instructions of both the control loop (sensor unit and control unit). The signal is sent by the sensor element to the control unit. Through the actuator, the posterior controls the position and orientation of the valve.

Selection Parameters 

To select the right option, it is important to consider the following parameters: Mode (vapor, liquid, or two-phase), flow velocity, inlet pressure, and flow velocity. Inlet temperature. Density. Molecular weight. Viscosity. Specific heat ratio. Critical temperature. When determining flow rates, you should also consider safety margins. Also, consider site geometry, safety margin, pipeline size, MOC, and safe breakdown location.

Select the right control valve


It is possible to determine the suitability of a particular application based on the information above. Each valve has a unique role. It is therefore important to identify the right person for the job. Let’s look at some taps used in control programs.

This valve is a great choice for high differential pressure applications. These valves can be used for small current services and noise reduction in clean media. Globe valves can be easily replaced and maintained. This is particularly useful in situations where process conditions change quickly or when the plant’s capacity increases. Butterfly valves are lightweight and affordable, making them attractive for bulk applications. The Butterfly valves are perfect for applications where a low-pressure drop is required.

Plug Valves


These valves can be used in both common and more difficult applications. These valves are used extensively in refineries and petrochemicals. They can also be used to process viscous liquids and slurry. For applications that don’t require a residual valve, plug valves are the best choice.

There are a lot of Gala Valves suppliers working in Pakistan. If you are searching for the best Gala Valves supplier in Pakistan then Crescent Corporation must be your first choice. They are an accomplished and experienced supplier of gala valves in Pakistan and have many satisfied customers.


Scroll to Top